產品中心&Product Center
新型圓錐破碎機
New Type Cone Crusher

新型圓錐式破碎機:
  新型圓錐式破碎機,是通過電動機的旋轉運動,經皮帶輪或聯軸器、傳動軸、偏心套的傳動,使破碎壁繞一固定點作旋擺運動,從而使破碎圓錐的破碎壁時而靠近又時而離開固裝在調整套上的扎臼壁表面,使礦石在破碎腔內不斷受到沖擊,擠壓和彎曲作用而實現礦石的破碎。
  該機具有破碎力巨大、效率高、運作成本低、間隙調整方便和產品粒度均勻等優點,適用于中等和中等以上硬度、進料粒度≤300mm、出料粒度≤65mm石料的破碎。破碎腔型式由礦石用途決定,標準型運用于中碎;中型適用于中細碎;短頭型適用于細碎(具體進出料粒度要根據石料硬度并通過選擇機型來確定)。
  新型圓錐式破碎機采用多缸液壓清腔系統,降低操作勞動強度。采用液壓蝶簧缸及機械雙鎖緊方式,使鎖緊更加可靠。每種規格的腔型多,能更好滿足用戶的不同需求。采用可補償式潤滑脂密封,最大限度避免粉塵對潤滑油的污染,使整機各零部件工作更加可靠,延長使用壽命。采用多組彈簧結構的安全保險系統,可使鐵塊等不可破碎物通過破碎腔而不危害破碎機,使用更加安全可靠。

  New Type Cone Crusher :
  New type cone crusher works in this way: The electromotor of the cone crusher drives the mantle to make periodic swing movement around  a fixed point through the pulley ,   coupling,  transmission  shaft  and eccentric  sleeve ;  and consequently the surface of the mantle approaches and leaves the surface of the concave fixed on the adjusting sleeve  now and then. So that the stones are continuously impacted , squeezed , bent and finally crushed inside the crushing  cavity. 
   The machine has the following advantages: huge crushing force, high  production  efficiency, low operational cost ,convenient to adjust the space between the mantle and the concave as well as  uniform  product sizes. It is suitable for crushing  stones with   medium or over medium hardness  and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 65 mm. The type of the crushing cavity can be decided by the stone crushing requirements . The standard type is applied to medium  crushing; the medium type is applied to medium  or fine crushing;the short head type is applied to fine crushing(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
  The labor strength of workers has been reduced by adopting a multi-cylinder hydraulic  chamber clearing system. Locking  becomes  more reliable with two ways of locking, namely hydraulic butterfly spring cylinder locking and mechanic locking. Various  types of crushing cavity can meet the users'  different  requirements. Dust pollution to the lubricating oil   has been  avoided maximally  by adopting compensable grease  sealing, so that    all parts of the crusher can operate more reliably and serve for  longer  lives. The safety system consisting of  multi-group springs allows unbreakable matters such as  iron blocks go through the crushing cavity without damage to the crusher, resulting  to  safer and  more reliable operation .

 

技術參數 Technical  parameters

 

型號規格
Type

腔型
Cavity type

破碎錐直徑
Mantle
diameter

進料粒度
Feed
size

排料范圍
Discharge
range

生產能力
Capacity

電機功率
Electromotor
speed

重量
Weight

外型尺寸
Exterior
Dimensions


Remarks

(mm)

(mm)

(mm)

(t/h)

(kw)

(t)

長寬高(m)
L×W×H (m)

PSGB-1620

標準細型
Standard fine type

1676

≤178

16-38

181-327

220

43.3

3.94×2.95×3.77

配電機、啟動柜
Motor and starter cabinet configured

PSGB-1624

標準中型
Standard
medium
type

≤205

22-51

258-417

PSGB-1626

標準粗型
Standard
crude type

≤228

25-64

299-635

PSGB-1636

標準特粗型
Standard
Specially
crude type

≤313

38-64

431-630

PSGD-1607

短頭細型
Fine short head type

≤60

5-13

90-209

43.9

PSGD-1608

短頭中型
Medium
short head type

≤76

6-19

136-281

PSGD-1613

短頭粗型
Crude short head type

≤113

10-25

190-336

PSGD-1614

短頭特粗型
Specially crude short head type

13-25

253-336

PSGB-1313

標準細型
Standard fine type

1295

≤115

13-31

109-181

160

22.5

2.98×1.87×3.16

配電機、啟動柜
Motor and starter cabinet configured

PSGB-1321

標準中型
Standard medium type

≤178

16-38

132-253

PSGB-1324

標準粗型
Standard
crude type

≤205

19-51

172-349

PSGB-1325

標準特粗型
Standard
Specially
crude type

≤220

25-51

236-358

PSGD-1306

短頭細型
Fine short head type

≤54

3-16

36-163

22.6

PSGD-1308

短頭中型
Medium
short head type

≤76

6-16

82-163

PSGD-1310

短頭粗型
Crude short head type

≤89

8-25

109-227

PSGD-1313

短頭特粗型
Specially crude short head type

≤113

16-25

209-236

PSGB-0910

標準細型
Standard fine type

914

≤85

9-22

45-91

75

9.9

2.66×1.64×2.24

配電機、啟動柜
Motor and starter cabinet configured

PSGB-0917

標準粗型
Standard
crude type

≤150

13-38

59-163

PSGB-0918

標準特粗型
Standard
Specially
crude type

≤150

25-38

118-163

PSGD-0904

短頭細型
Fine short head type

≤35

3-13

27-90

10.6

PSGD-0906

短頭中型
Medium
short head type

≤65

3-16

27-100

PSGD-0907

短頭粗型
Crude short head type

≤85

6-19

59-129

 
友情鏈接&Friendly Link
在線咨詢
Inquiry Online
广东11选5开奖信息

  • <strike id="mrbc1"></strike>

    <pre id="mrbc1"></pre>

        <strike id="mrbc1"></strike>