產品中心&Product Center
環保智能反擊式破碎機
Environment-friendly Intelligent Impact Crusher

  環保智能反擊式破碎機:
  環保智能反擊式破碎機,是我公司為了改變傳統破碎機效率低、能耗高、成品率低、粉塵或污水污染環境,人工操控安全隱患多的局面而自主研制并具有智能、高效、節能、環保、安全、視頻操控、遠程監控等多功能的碎石成套設備。其技術經廣東省科學技術情報研究所和江蘇省科技查新咨詢中心的《科技查新報告》確認,國內首創。為礦山碎石加工工藝設備升級改造提供技術條件,也將成為未來發展的必然趨勢。已申報多項國家專利。
  該機是利用沖擊能來破碎石料的碎石機械。本機工作時,在電動機的帶動下,轉子高速旋轉,石料進入板錘作用區時,與轉子上的板錘撞擊破碎后拋至反擊襯板上再次撞擊破碎,然后又從反擊襯板上彈回到板錘作用區重新撞擊破碎,此過程重復進行,石料由大到小進入第一、第二、第三破碎腔內重復進行破碎,石料經破碎后由出料口排出。調整反擊架與轉子之間的間隙、調節轉子轉速,自動改變出料粒度。
  該機配有均衡送料器、使石料在破碎腔內分布均勻,從而增加撞擊面;轉子板錘采用卡塊壓緊裝置裝配,裝卸簡便、運轉安全可靠;科學設計撞擊角度,增大撞擊力,使石料在破碎腔內下行過程中重復多次形成石料與板錘、石料與反擊襯板、石料與石料之間相互撞擊,從而提高石料的破碎率,提高成品產量、降低磨損成本;改用可移動式方鋼,當板錘磨損、板錘與方鋼間隔過大時,移動方鋼避免間隔過大而漏料,確保石料的全部撞擊破碎,從而保證成品石子的高質量;采用Z型板錘,板錘磨損處加寬加厚增加磨削量,提高板錘的利用率;配置數控粉塵收除器進行粉塵收除利用,避免粉塵外泄污染環境,實現環保生產;配套智能控制系統,智能控制系統通過應用傳感技術、計算機技術、變頻技術,實現智能生產;通過互聯網實現遠程監控并具有以下12項主要技術優勢:
  1、成品質量好:所制成品石呈似立方體、無張力、無裂縫、針片狀少、含粉率低、連續級配好,符合高速公路、高速鐵路、攪拌站等對砂石高質量的要求;
  2、成品產量大、效率高:按照主機負荷自動調節供料量,自動控制主機滿負荷生產,碎石產量是同等主機電機功率反擊式破碎機的1.3倍以上;
  3、成品率高:按照設定的出料粒度自動調節主機轉子轉速,自動控制出料粒度,石料一次性碎石成品率85%以上(特硬石料70%以上);
  4、能耗低:撞擊角度設計科學、石料相互撞擊、撞擊力大,主機電耗低;
  5、原料利用率高:所制成品碎石含粉量低;
  6、視頻監控、人員安全:視頻操控、通過互聯網遠程監控,避免現場操控、改善工作環境、減少人工成本、確保人員安全;
  7、設備連鎖控制:當主機超負荷或卡料時,所有設備自動停機,確保設備運行安全,同時設有自動開機、自動關機、定時關機、定量關機、無料關機、遙控關機、遠程互聯網關機;
  8、數控除塵:調節粉塵收除能力,避免粉塵外泄污染環境,實現環保生產;
  9、自動統計成品產量:便于現場成品管理和產量考核;
  10、自動檢測設備故障:便于設備故障快速排除;
  11、成品銷售自動秤重:自動裝車,減少裝車人工及成本;
  12、智能控制與手動操控兼備:既可采用智能控制,也可切換為人工手動操作控制。
  環保智能反擊式破碎機可通過調整配置,組合成五種機型,供用戶選購:
  其一:XPF新型反擊式破碎機(配備反擊式破碎主機、電動機、自耦減壓啟動柜,實現碎石功能)。
  其二:SKPF數控反擊式破碎機(配備反擊式破碎主機、電動機、變頻控制柜,實現碎石并手動調節出料粒度);
  其三:ZNPF智能反擊式破碎機(配備反擊式破碎主機、電動機、智能控制系統,實現碎石并自動調節出料粒度、自動保持主機滿負荷工作);
  其四:HBPF環保反擊式破碎機(配備反擊式破碎主機、電動機、多功能機座、粉塵收除器,實現碎石和除塵功能);
  其五:HZPF環保智能反擊式破碎機(配備所有配置,實現上述全部功能);

  The environment-friendly  intelligent impact crusher:
  In order to change the  statuses  of  traditional  crushers such as low efficiency, high energy consumption, low product yield rate , dust or effluent pollution on the environment , many  hidden  dangers brought about by manual operation and control ,our company has independently developed a set of  multifunction equipments for stone crushing (i.e. environment-friendly intelligent impact crusher ), which possesses a lot of advantages such as intelligence , high efficiency , energy saving , environment-friendly, safety ,video operation and control,  and  remote monitoring ,etc.. The technology of the machine has been confirmed to pioneer domestically in the same industry in the scientific and technical novelty search reports provided by  Guangdong Institute of Scientific and Technical Information , and Scientific and Technical Novelty Search Consultation Centre of Jiangsu Province .This machine will provide technical  conditions for upgrading the existing  stone crushing and processing  equipments of the quarries, and will be the  inevitable  trend for future development of crushing  equipments . Several national patents have been applied for the machine .
  The machine is a stone crushing machinery using impact energy to crush  stones . When the machine is working, the rotor driven by the electromotor rotates at a high speed, and the  stones enter  the functioning area of   blow bars  and impact the blow bars mounted on the rotor  and are crushed , and  then thrown onto the impact liners to be crushed again by impact,  and rebounded into the functioning area of  blow bars to be crushed  once more by impact. Such a  process will be repeated for stones to enter the 1st, 2nd and 3rd    crushing cavity based on the size range from big to small until the crushed stones are  small enough to escape from the bottom discharging port .  The discharge sizes will be changed automatically by adjusting the space between the impact rack and the rotor , or by adjusting the rotating speed of the rotor .
  The machine is equipped with an equilibrium feeder , which enables the stones to distribute uniformly in the crushing cavity and improves the utilization of  impacting space inside the crushing cavity. Blow bars on the rotor are assembled with clamping block  devices , easy to be installed  and dismantled ,and safe and reliable to operate. The impact angles are designed scientifically to increase the impact force.  Repeated impact between stones and blow bars , between stones and impact  liners ,and rock-on-rock will occur for many times when the stones move down in the crushing cavity, leading to higher crushing rate and higher finished product output, and less abrasion cost . Movable  square steel is adopted instead . When  the gap between the blow bars and square steel becomes too big because of  blow  bar  abrasion , the square steel may be moved to avoid too big gap and  stones leakage  , ensuring all stones crushed by impact and the quality of finished  gravels.  Z type blow bars are adopted for higher utilization  rate  of  blow bars, the abrasion positions of blow bars have been widened and thickened for increasing grinding quantity . A numerical control dust collector is configured   for eliminating and recycling dust , so that  dust emission to pollute the environment will be avoided and environment-friendly production  realized.  Intelligent control system is equipped for the machine to realize intelligent production by using sensing technology, computer technology, variable frequency technology.  Remote monitoring  is realized through internet . The machine has 12 items of main technical advantages as following:
    1.The Quality of the finished products  is good: The finished product gravels  produced by the machine are of a similarly cubic shape  , free of tension and free of fissures , of less sands with needle and flake shape, of low  powder ratio, of good continuous size distribution , meeting the requirements of high quality stipulated by expressway , high-speed  rail and cement mixing station and so on.
    2. Large output of finished products and high efficiency: The feed  amount is  regulated automatically according to  the load of the main unit , and full load production of the main unit will be controlled automatically. The crushed gravel output of the machine is 1.3 times as much as the impact crusher with the same motor power of main unit .
     3. High product yield rate : The rotation speed of the rotor of the main unit will be regulated automatically according to a given discharge size, and the discharge size will be also controlled automatically, the crushed stone product yield rate one time will be over  85% ( over 70 % for  special hard stones).
    4. Low energy consumption : The design of impact angles is scientific, leading to big impact force , and making the stones impact each other ,low power consumption of the main unit .
    5. High utilization rate of raw material : The product gravels  contain low content of powder .
    6. Video monitoring and safety for operators :  Operation and control in situ is avoided through video operation and control and remote monitoring through internet, improving the working conditions ,reducing labor  cost and ensuring safety for operators.
    7. Interlocked  control  of equipments: When an overload or a clog occurred in the main unit,  all equipments concerned will stop automatically  for ensuring safe operation of the equipments concerned. Meanwhile  there are functions configured such as automatic start, automatic stop,  timed stop ,  stop for a preset quantity, stop for  no materials, stop by  remote control , remote stop through internet .
  8. Numerical  control  dust elimination : Regulating  dust collecting capacity  to avoid dust emission to pollute the environment and realize environment-friendly  production.
  9. Automatic  statistics of output of finished products: Convenient for finished product management on site and yield  assessment .
  10. Automatic  detection  of equipment failures : Convenient for quickly eliminating equipment failures.
  11. Automatic weighing for finished product sale : Automatic truck loading  reduces labor hours and labor cost for truck loading .
  12. Combining  intelligent  control with manual operation and control: It can be controlled by intelligence , or switched to manual operation and control .
  The configurations of the environment-friendly  intelligent impact crusher  can be adjusted to form five  types of  machine for users' option.
  1. XPF new type impact crusher ( The main unit of impact crusher , electromotor , and an auto-coupling voltage reducing starter cabinet are equipped  for   obtaining the function of stone crushing.);
  2. SKPF numerical control impact crusher (The main unit of impact crusher  , electromotor , and a variable frequency control cabinet are equipped  for   obtaining the function of stone crushing and of manual  regulation of the discharge  sizes.);
  3. ZNPF intelligent impact crusher (The main unit of impact crusher  , electromotor , and an intelligent  control  system are equipped  for   obtaining the function of stone crushing , and of automatic regulation of   the discharge  sizes , of automatically maintaining full load operation of the main unit. ); 
  4. HBPF environment-friendly  impact crusher (the main unit of impact crusher , electromotor , a multi-function machine base and a dust collector are equipped  for   obtaining the function of stone crushing  and of dust elimination.);
  5 . HZPF environment-friendly intelligent impact crusher (All configurations above will  obtain  all  functions  above.) .

技術參數 Technical  parameters

型號規格
Type

進料粒度
Feed
size

出料粒度
(排料范圍)
Discharge size
(Discharge range )

生產能力
Capacity

轉子直徑
Rotor Diameter

轉子轉速
Rotor Speed

電機功率
Electromotor speed

重量
Weight

外型尺寸
Exterior
Dimensions


Remarks

(mm)

(mm)

(t/h)

(mm)

(r/min)

(kW)

(t)

長寬高(m)
L×W×H
(m)

HZPF1418

花崗石
Granite
≤100

≤40 (25-100)

210-320

φ1425×1767

436-575

280/3

46.3

5.70×3.90× 3.10

配電機 配智能控制系統315kW
Motor and intelligent control system(315kW) configured

硬石灰石
Hard limestone
≤200

≤50 (25-100)

250-380

石灰石
Limestone
≤300

≤60 (25-100)

300-450

HZPF1314

花崗石
Granite
≤80

≤40 (20-80)

150-225

φ1345×1405

462-615

200/2.4

35.9

3.98×3.45×3.90

配Y系列電機 配智能控制系統220kW
Y series motor and intelligent control system(220kW) configured

硬石灰石
Hard limestone
≤160

≤50 (20-80)

180-270

石灰石
Limestone
≤240

≤60 (20-80)

220-330

HZPF1620

花崗石
Granite
≤100

≤40 (30-100)

300-450

φ1600×2105

392-508

400/3.7

64.0

6.40×4.20×4.50

配電機 配智能控制系統450kW
Motor and intelligent control system(450kW) configured

硬石灰石
Hard limestone
≤200

≤50 (30-100)

360-540

石灰石
limestone
≤300

≤60 (30-100)

420-630

 
友情鏈接&Friendly Link
在線咨詢
Inquiry Online
广东11选5开奖信息